Metal grinder is a new type of metal grinding equipment, mainly raw iron, aluminum ash, magnesium, iron ore and other equipment used to process the powder metal grinder will cans, Coke cans, paint bottles crushed by metal grinder equipment to facilitate small metal particles pulverized transport, reduce transportation costs, and accelerate the speed of iron. It can be a variety of metal and circuit board materials and other materials, shapes and sizes to tear tractable. Is the ideal equipment as metal smelting, iron and steel and metal recycling scrap metal processing enterprises.
2, the scope of metal grinder
Various metal shredder scrap metal cans, Lulu irrigation, drink cans, beer cans, Red Bull cans, rice pudding pot, and its being cans, metal bottles, cans, coke cans, paint bucket, thin scrap metal, scrap iron slag, moon cake boxes, cans and other cans broken into groups like particles, thus reducing transport costs and increase the speed of scrap cast iron stove. Metal grinder equipment at work, the material in the crushing cavity full and effective crushing, high yield, low energy consumption, high efficiency, crushing the material evenly. And use of the device, low noise, no pollution, operation simple, easy maintenance. the machine is used to crush raw iron, alloys, ferrosilicon powder, caps, cans, circuit boards, metal scrap cell phone batteries and other fragile materials. Use: iron, manganese powder, aluminum powder, zinc powder, ferrosilicon powder, any metal can be crushed. Exclusive manufacturing, quality and cheap, welcomed the order.
3, metal grinder features and technical advantages
1. geared motor drive.
2. engaging blade, the cans completely broken.
3. The use of special blades, blade hardness of not less than HRC55 (rasp HRC hardness is 51 degrees)
4. rugged construction, clouds type stiffener plate to ensure strong box.
5. automation button control, safe and convenient.
6. The security identification and security labels to ensure safe use.
7. can be equipped with conveyor belt feeding.
4, metal grinder with care instructions
1 test before starting to strictly check the machine all parts of the installation meets the requirements, screw bolts are loose, can handle gently lift with test switch, if there is shell hit and so on. Also check the direction of rotation, non-pulverized flammable, explosive materials, in order to avoid accidents.
2 production should be maintained in order to ensure a uniform cutting quality crushed and normal production, while non-motor overload, to ensure the normal operation of the machine.
3 In addition to always pay attention to check the location tightening loose outside, but also should pay attention to check the wear of consumable parts, such as badly worn should be replaced to avoid damage to the main components. And take the necessary precautions against fire.
4 due to the higher speed, in addition to the correct installation firm, but at the same time to maintain good lubrication in order to maintain the normal operation of the machine. Under normal circumstances bearing temperature does not exceed 70 degrees as normal. Plus a host bearing a week butter, molybdenum disulfide, high-speed butter better.
NOTE: The physical properties of the production capacity and crushing of materials, feeding methods, feed particle size and composition of the working conditions and so on.
5, metal grinder technical parameters